Nylon PA46
CNC Machining
Services
Precision CNC machining for Nylon 46 (PA46) components — from prototypes to repeat production. We help OEMs and engineering teams turn drawings and 3D models into reliable, high-performance PA46 parts with tight tolerances, consistent quality, and export-ready service from Dongguan, China.
Exceptional Heat & Wear Performance
Nylon PA46 (Stanyl) is a high-crystallinity polyamide with outstanding heat resistance, strength, and wear performance versus standard nylons — ideal when PA6/PA66 cannot meet elevated temperature or long-term dimensional stability requirements.
+ Key Advantages
- High temperature capability: Higher melting point and HDT than PA66; retains stiffness at elevated temperatures
- Good dimensional stability: Lower creep and better property retention under heat load than standard nylons
- Excellent wear & low friction: Suitable for gears, bushings, cams, and sliding elements
- Chemical resistance: Good resistance to oils, greases, fuels, and many hydrocarbons
- Moisture behavior: Absorbs less moisture than PA6, improving dimensional stability
- Cost-performance: Significantly lower cost than PEEK for high-temp, wear-critical parts
! Considerations
- 1 Stock shapes (rod/plate) are less common than PA6/PA66 — check lead times early
- 2 Notch sensitivity and brittleness in dry condition require sharp tools and controlled machining
- 3 Moisture and conditioning can influence dimensions — plan tolerances accordingly
- 4 Not ideal for hot-water/steam environments; consider PPSU/PEEK/PEI for continuous hydrothermal exposure
Industries We Serve With PA46
Custom Nylon PA46 CNC machining across diverse industrial sectors worldwide.
Industrial Automation
Wear strips, cam followers, guides, rollers, timing gears
Semiconductor & Electronics
Low-wear components, pick-and-place tooling, insulating parts
Medical & Laboratory
Precision bushings, valve seats, fixtures (grade-dependent)
Automotive & Transportation
Timing gears, chain guides, throttle elements, underhood wear parts
Aerospace & Defense
Lightweight wear components, high-temp insulation parts
Pumps, Valves & Fluid
Seats, rotors, thrust bearings, spacers
Robotics, Jigs & Fixtures
Custom nests, grippers, wear pads, vacuum tooling
Food & Packaging
Low-friction elements (verify FDA/EC compliance)
PA46 Grades We Machine
Broad grade coverage from unfilled to specialty formulations.
- Unfilled PA46
- Glass-fiber reinforced (30-50% GF) for higher stiffness
- Lubricated / wear-optimized filled grades (PTFE, MoS2)
- Flame-retardant PA46 (UL 94 V-0)
- Antistatic or conductive grades
- Color options: natural/off-white, black; others subject to availability
CNC Machining Capabilities
Precision machining for complex PA46 geometries.
3-axis, 4-axis for complex geometries and tight tolerances
High-precision bushings, shafts, rings, spacers, threaded parts
Drilling, tapping, reaming, counterboring, countersinking, slotting, threading
Press-fit inserts, dowel pins, laser marking, lot traceability
Thin walls (design-dependent), pocketing, complex curves, fine details with sharp tooling
Single prototypes to low/medium-volume production; CMM, optical measurement, go/no-go gauges
Tolerances & Surface Finish
Achievable tolerances for PA46 in environment-controlled conditions with good fixturing.
Typical Tolerances
Stability Notes
PA46 absorbs some moisture over time; dimensions can shift from dry-as-machined to equilibrium. Options:
- Machine and ship dry-as-machined
- Pre-condition at 23°C/50% RH and measure at equilibrium
- Add humidity barrier packaging with desiccants
Design-for-Machining for PA46
Optimize your PA46 parts for manufacturability and performance.
Radii & Edges
Avoid sharp internal corners; use 0.5-1.0 mm fillets. Provide edge breaks (0.2-0.5 mm chamfer) to reduce chipping.
Wall Thickness
Keep walls ≥1.5-2.0 mm where possible; use ribs to reinforce instead of ultra-thin walls.
Gears & Wear Parts
Consider lubricated or GF grades; specify intended lubrication or dry-run conditions.
RFQ Support
Send Your Drawing for a Quote
Share your 2D drawing, 3D model, material, quantity, tolerance, surface finish, and application details. Our team will review manufacturability and reply with a practical quotation.
Email: info@plasticcncpro.com
Address: 29 Fuxing Road, Dongguan City, Guangdong Province, China